| System Features |
| 1. |
3KW MTP program memory (programming cycle at least 1,000 times) |
| 2. |
256 Bytes data RAM |
| 3. |
One hardware 16-bit timer |
| 4. |
Two hardware 8-bit timers with PWM generator |
| 5. |
One set triple 11bit SuLED (Super LED) PWM generators and timers |
| 6. |
One hardware comparator |
| 7. |
Band-gap circuit to provide 1.20V reference voltage |
| 8. |
Up to 14-channel 12-bit resolution R-type*ADC with one channel comes from band gap voltage |
| |
*Note: R-Type ADC means Resistive type ADC. Its linearity(INL & DNL), heat stability and power noise rejection would not be as good as the C-Type ADC which build in the PMS13x series |
| 9. |
ADC reference high voltage: external input, internal VDD |
| 10. |
Max. 18 IO pins with optional pull-high resistor, four of them with additional pull-low resistor |
| 11. |
Every IO pin can be configured to enable wake-up function |
| 12. |
Built-in VDD/2 LCD bias voltage generator to provide maximum 5x12 dots LCD displayy |
| 13. |
Clock sources: IHRC, ILRC & EOSC (XTAL) |
| 14. |
For every wake-up enabled IO, two optional wake-up speed are supported: normal and fast |
| 15. |
16 selectable levels of LVR reset from 1.8V to 4.5V |
| 16. |
Two external interrupt pins |
| |
|
| CPU Features |
| 1. |
8-bit high performance RISC CPU |
| 2. |
90 powerful instructions |
| 3. |
Most instructions are 1T execution cycle |
| 4. |
Programmable stack pointer and adjustable stack level |
| 5. |
Direct and indirect addressing modes for data access. Data memories are available for use as an index pointer of Indirect addressing mode |
| 6. |
IO space and memory space are independent |
| |
|